Main article: Signaling (telecommunications)

In telephony, Common Channel Signaling (CCS) or in the US Common Channel Interoffice Signaling (CCIS) is the transmission of signaling information (control information) on a separate channel to the data, and, more specifically, where that signaling channel controls multiple data channels.¹

For example, in the PSTN one channel of a communications link is typically used for the sole purpose of carrying signaling for establishment and clear down of telephone calls. The remaining channels are used entirely for the transmission of voice data. In most cases, a single 64kbit/s channel is sufficient to handle the call setup and call clear-down traffic for numerous voice and data channels.²

The logical alternative to CCS is Channel Associated Signaling (CAS), where each bearer channel has a signaling channel dedicated to it.

CCS offers the following advantages over CAS, in the context of the PSTN:³

• Faster call setup.
• No falsing interference between signaling tones by network and speech frequencies.
• Greater trunking efficiency due to the quicker set up and clear down, thereby reducing traffic on the network.
• No security issues related to the use of in-band signaling with CAS.
• CCS allows the transfer of additional information along with the signaling traffic providing features such as caller ID.

The most common CCS signaling methods in use today are ISDN and SS7.

ISDN signalling is used primarily on trunks connecting end-user PBX systems to a central office. SS7 is primarily used within the PSTN. The two signaling methods are very similar since they share a common heritage and in some cases, the same signaling messages are transmitted in both ISDN and SS7.

CCS is distinct from in-band or out-of-band signalling, which are to the data band what CCS and CAS are to the channel.

Notes

References