![]() |
|||||||||||||
|
Watch battery |
| Please help improve this article by expanding it. Further information might be found on the talk page or at requests for expansion. (March 2007) |
A watch battery, button cell, silver button cell, or coin cell is a small form-factor battery designed for use in wrist watches, pocket calculators, hearing aids, and similar compact portable electronics products. They are compact and have long life. Examples are mercury oxide and silver oxide cells. A mercury oxide cell has a mercury oxide cathode and a zinc anode. Watch batteries are usually a single cell with a nominal voltage between 1.5 and 3 V. Common anode materials are zinc or lithium, common cathode materials are manganese dioxide, silver oxide, carbon monofluoride or copper oxide. The cylindrical sides of these types of batteries is part of the positive (+) terminal.
Contents |
International standard IEC 60086-3 defines an alphanumeric coding system for watch batteries.
The first letter identifies the electrochemical system used in the battery, which also implies a nominal voltage:
| Letter code |
Positive electrode | Electrolyte | Negative electrode | Nominal voltage |
End-point voltage |
|---|---|---|---|---|---|
| L | Manganese dioxide | Alkali | Zinc | 1.5 | 1.0 |
| S | Silver oxide | Alkali | Zinc | 1.55 | 1.2 |
| P | Oxygen | Alkali | Zinc | 1.65 | 1.4 |
| C | Manganese dioxide | Organic | Lithium | 3 | 2.0 |
| B | Carbon monofluoride | Organic | Lithium | 3 | 2.0 |
| G | Copper oxide | Organic | Lithium | 1.5 | 1.2 |
The "C"-type 3-V lithium cells are today the most commonly used type in quartz watches, calculators, small PDA devices, and computer motherboard clocks.
Its package's size is identified by a three-to-four digit code, preceded by the letter "R" to indicate a round cell. The first 1–2 digits indicate the outer diameter of the battery (in millimeters, rounded down), and the last two digits indicate the overall height (in tenths of millimeters, rounded down). Examples:
ISO/IEC 83-3 lists the following diameter codes:
The following height codes are used with 16–24 mm diameter batteries:
After the package code, the following additional letters may optionally appear in the type designation to indicate the electrolyte used:
An appended letter "W" states that this battery complies with all the requirements of the IEC 86-3 standard.
Apart from the type code described in the preceding section, watch batteries should also be marked with
The manufacturing date can be abbreviated to the last digit of the year, followed a digit or letter indicating the month, where O, Y, and Z are used for October, November and December, respectively (e.g., 01 = January 1990 or January 2000, 9Y = November 1999).
Regular watch batteries are not rechargeable. Rechargeable button cells are commercially available, but are not commonly used due to their inferior capacity.
|
|||||